李声慈

【来源: | 发布日期:2019-05-16 】

  名:李声慈

学位职称:博士副教授

出生年月:198810

联系方式:Lishengci1988@163.com

办公地点:稀土大楼C1059

讲授课程:先后讲授《金属塑性成型原理》、《材料腐蚀与防护》、《材料性能学》等

研究方向:铝合金、高强钢及优特钢设计开发、组织性能控制与服役性能评价,包括增材制造、塑性变形、焊接性能、疲劳断裂、腐蚀性能等。

个人简介:

李声慈,男,博士,副教授,硕士研究生导师。本硕博均毕业于北京科技大学材料学院;新钢集团出站博士后。担任国家自然科学基金项目通讯评审专家、教育部学位中心学位论文评审专家、波兰国家自然科学基金通讯评审专家、中国有色金属学会有色金属材料智库专家江西省机械工程学会锻压分会理事入选赣州市科技创新青年人才,江西理工大学清江优秀人才;担任Mater Res Lett》、《J Iron Steel Res Int》、《工程科学学报》、《材料工程》等SCI/EI期刊青年编委。

主持国家自然科学基金青年项目和地区项目、中国博士后科学基金特别资助项目、江西省自然科学基金青年项目等10余项课题;以第一作者或通讯作者在Mater DesMater Sci Eng AInt J FatigueMater CharactJ Alloys Comp等国内外期刊发表论文30余篇;目前指导研究生9人,指导本科生获国家级大学生创新创业项目2项,获得互联网+大赛国家级铜奖在内的省级以上学科竞赛奖励10余项;获江西理工大学优秀本科毕业论文指导教师、优秀硕士学位论文指导教师。

近年发表的代表性论文/专利

[1] 发明专利,ZL202210063200.6,一种添加ErPr的高强耐蚀Al-Zn-Mg-Cu合金及其制备方法,2023,第一发明人。

[2] Dehua Li, Zhiqian Zhang, Shengci Li*, Jiamin Yang, Siyu Zhang, Xinli Bian, Yuqin Zhang, Liang Qi, Olanrewaju A. Ojo*. Microstructure, mechanical properties and fatigue crack growth behavior of an Al-Zn-Mg-Cu-Si-Zr-Er alloy fabricated by laser powder bed fusion [J]. International Journal of Fatigue, 2023.

[3] Zhiqian Zhang, Dehua Li, Shengci Li*, Hongling Deng, Siyu Zhang, Jin Fang, HaoYuan, Bo Deng, LiangQi. Effect of direct aging treatment on microstructure, mechanical and corrosion properties of a Si-Zr-Er modified Al-Zn-Mg-Cu alloy prepared by selective laser melting technology, Materials Characterization (2022) 112459.

[4] Huilong Zhong, Shengci Li*, Jiali Wu, Hongling Deng, Jiqiang Chen, Na Yan, Zixin Chen, Liangbo Duan. Effects of retrogression and re-aging treatment on precipitation behavior, mechanical and corrosion properties of a Zr+Er modified Al-Zn-Mg-Cu alloy, Materials Characterization 183 (2022) 111617.

[5] Huilong Zhong, Shengci Li*, Zhiqian Zhang, Dehua Li, Hongling Deng, Jiqiang Chen, Liang Qi, Olanrewaju A Ojo*. Precipitation behavior, mechanical properties, and corrosion resistance of rare earth–modified Al-Zn-Mg-Cu alloys [J]. Materials Today Communications 31 (2022) 103732.

[6] Jiajin Huang, Shengci Li*, Huilong Zhong, Dehua Li, Zhiqian Zhang. Effects of notch position on the fatigue crack growth behavior of dissimilar laser welded DP980/QP980 joint, Fatigue & Fracture Engineering Materials & Structures. 2022; 1-15. doi:10.1111/ffe.13653

[7] Jiajin Huang, Shengci Li* Huilong Zhong, Shishui Xiao, Dehua Li. Microstructure, mechanical properties, and corrosion behavior of laser-welded dissimilar joints between DP980 and QP980 steel, Steel Research International, 2021, 2100541

[8] Changwang Yuan, Shengci Li *, Jiajin Huang, Xinbo Lin, Xianzhi Bian, Junming Chen. Effect of hierarchical martensitic microstructure on fatigue crack growth behavior of ultra-high strength hot stamping steel, Materials Characterization 174 (2021) 111041.

[9] Chaobin Lai, Wei Huang, Shengci Li, Tao Liu, Ruiguo Lv, Xiaoyong Tang, Jianlin Yu. Effects of quenching and tempering heat treatment on microstructure, mechanical properties, and fatigue crack growth behavior of 51CrV4 spring steel [J]. Materials Research Express 8 (2021) 096514.

[10] Lan Zhang, Huilong Zhong, Shengci Li*, Hongjin Zhao*, Jiqiang Chen, Liang Qi, Microstructure, mechanical properties and fatigue crack growth behavior of friction stir welded joint of 6061-T6 aluminum alloy, International Journal of Fatigue, 2020, 135, 105556.

[11] Jincheng Nie, Shengci Li *, Huilong Zhong, Changjing Hu, Xiangsong Lin, Jiqiang Chen, Renguo Guan. Microstructure and mechanical properties of laser welded 6061-T6 aluminum alloy under high strain rates, Metals 2020, 10, 1145

[12] Shengci Li, Chengyu Guo, Leilei Hao, Yonglin Kang*, Yuguo An*, In-situ EBSD study of deformation behaviour of 600 MPa grade dual phase steel during uniaxial tensile tests, Materials Science and Engineering: A, 2019, 759: 624-632.

[13] Shengci Li, Chengyu Guo, Leilei Hao, Yonglin Kang*, Yuguo An*, Microstructure-based modeling of mechanical properties and deformation behavior of DP600 dual phase steel, Steel Research International, 2019,90(12): 1900311.

[14] Li, Shengci*Zhang, YinghuiQi, LiangKang, Yonglin. Effect of single tensile overload on fatigue crack growth behavior in DP780 dual phase steelInternational Journal of Fatigue201810649-55

[15] Li ShengciZhang LanZhao HongjinQi LiangKang YonglinMechanical behavior of DP780 dual phase steel at a wide range of strain ratesMaterials Research Express2018(5): 096519

主持承担的部分科研项目:

[1] 国家自然科学基金,地区基金项目,限制模压变形与时效协同作用影响铝合金疲劳裂纹扩展行为的微观机理,主持;

[2] 国家自然科学基金青年基金项目,多尺度亚结构组织对热成形钢疲劳裂纹扩展的影响规律与机理,主持;

[3] 中国博士后科学基金特别资助项目,板条马氏体疲劳裂纹扩展的组织控制单元及其择优扩展机理研究,主持;

[4] 江西省重点研发计划项目子课题,优特宽钢带热轧-冷轧-热处理一体化关键技术研究及应用,主持;

[5] 江西省自然科学基金青年基金项目,980MPa级淬火配分钢疲劳裂纹扩展的多尺度组织调控规律与机理,主持;

[6] 江西省教育厅科技项目,异种钢DP980/QP980激光焊接接头的疲劳断裂失效机理研究,主持;

[7] 江西省博士后择优资助项目,疲劳载荷下异种先进高强钢激光拼焊接头的断裂失效机理研究,主持;

[8] 赣州市科技创新人才计划项目,稀土复合添加对高强度7系铝合金析出行为及耐腐蚀性的影响规律与机理,主持

[9] 横向课题,复相钢的亚结构表征及本构模型参数,主持

[10] 横向课题,二种模具钢的热机械疲劳性能研究,主持